Filter
Top Products
Basic Operations
15
Recording from the
radio
You can record the radio program on a tape
by calling up a preset station. You can use
TYPE I (normal) or TYPE II (CrO2) tapes. The
recording level is automatically adjusted.
1 Press TUNER/BAND to select the
band you want.
2 Press TUNING MODE so that
“PRESET” appears in the display.
3 Turn the jog dial to tune in a preset
station.
3
4
Turn clockwise
for higher
preset numbers.
Turn counter-
clockwise for
lower preset
numbers.
+–
TUNED
STEREO
MHz
VOLUME
PRESET
Preset number
Frequency
1
2
To listen to non-preset radio
stations
Press TUNING MODE repeatedly so that
“MANUAL” appears in step 2, then tune in
the station by turning the jog dial.
Tips
• Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
• When an FM program is noisy, press
STEREO/MONO so that “MONO” appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.
Æ‚
…
„
Ȯ
⁄
⁄ ⁄
„
0)
…
„
Ȯ
POWER
5
REPEAT/
DOLBY NR
7
continued
6