Filter
Top Products
16
Playing a tape
You can use any type of tape, TYPE I
(normal), TYPE II (CrO2) or TYPE IV (metal) ,
since the deck automatically detects the tape
type. To select either deck A or B, press
DECK A or DECK B on the remote.
1133
º/‚
4 Press § EJECT and insert a blank
tape into deck B.
5 Press r.
Deck B stands by for recording.
6 Press EDIT/DIRECTION repeatedly
to select A to record on one side.
Select a (or RELAY) to record on
both sides.
7 Press on deck B.
Recording starts.
To stop recording
Press on deck B.
Tips
•If you want to record from the reverse side, press
ª so that ª (for reverse side) lights up.
•When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
•To record non-preset stations, select “MANUAL”
in step 2, then turn the jog dial to tune in the
desired station.
•When you want to reduce the hiss noise in low-
level high-frequency signals, press REPEAT/
DOLBY NR so that “DOLBY NR B” appears after
pressing r.
•If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
⁄
…
„
Ȯ
With the side
you want to
record facing
forward
Recording from the Radio
(continued)
2
VOLUME
Æ‚
…
„
Ȯ
⁄
⁄ ⁄
„
0)
…
„
Ȯ
POWER
bB
v
V
0 )
p
P
DECK A (
DECK B (
REPEAT/DOLBY NR
VOL +/–