Filter
Top Products
Basic Operations
13
Recording a CD
— CD Synchro Recording
⁄
…
„
Ȯ
With the side
you want to
record facing
forward
2
4
DISC SKIP
EX-CHANGE
The CD SYNCHRO button lets you record
from a CD to a tape easily. You can use TYPE
I (normal) or TYPE II (CrO2) tapes. The
recording level is adjusted automatically.
1 Press § EJECT and insert a blank
tape into deck B.
Æ‚
…
„
Ȯ
⁄
⁄ ⁄
„
0)
…
„
Ȯ
POWER
1
5
REPEAT/
DOLBY NR
3
2 Press § OPEN/CLOSE and place a
CD.
Then press again to close the disc tray.
If the indicator for the tray you want to
record is not lit green, press DISC SKIP
EX-CHANGE repeatedly so that it lights
green.
3 Press CD SYNCHRO.
Deck B stands by for recording and the
CD player stands by for playback. ·
(for front side) lights up.
4 Press EDIT/DIRECTION repeatedly
to select A to record on one side.
Select a (or RELAY) to record on
both sides.
5 Press on deck B.
Recording starts.
To stop recording
Press on deck B or on the CD player.
Tips
•If you want to record from the reverse side, press
ª so that ª (for reverse side) lights up.
•When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
•When you want to reduce the hiss noise in low-
level high-frequency signals, press REPEAT/
DOLBY NR so that “DOLBY NR B” appears after
pressing CD SYNCHRO.
Note
You cannot listen to other sources while recording.
With the label
side up. When
you play a single
CD, place it on
the inner circle
of the tray.
Æ‚
⁄
„
0)
+=