Filter
Top Products
64
GB
You can adjust the sound by raising or lowering
the level of specific frequency band, then store
up to three user equalizer settings in the
memory.
Use the buttons on the unit for the operation.
1 Press EQ BAND/MEMORY.
2 Turn . OPERATION DIAL >
clockwise or counterclockwise
repeatedly to adjust the frequency
level.
3 Repeat step 1 and 2 to adjust the level
of frequency band “MID”.
4 Repeat step 1 and 2 to adjust the level
of frequency band “HIGH”.
5 Press EQ BAND/MEMORY.
6 Turn . OPERATION DIAL >
clockwise or counterclockwise
repeatedly to select a user equalizer
number (1~3) you want to store the
equalizer settings.
7 Press EQ BAND/MEMORY.
This setting is automatically stored as the
user equalizer setting you selected in step 6.
The previous setting stored at this memory
location is erased and replaced by the new
setting.
To cancel storing
Turn . OPERATION DIAL > clockwise
repeatedly in step 6 to select “EXIT”, then press
EQ BAND
/MEMORY.
To call up a user equalizer setting
Press PRESET EQ repeatedly until the user
equalizer setting number you want appears in
the display.
Adjusting and storing the
graphic equalizer
GROOVE
A B
Frequency Band
Frequency level
GROOVE