Filter
Top Products
masterpage:Left
\
Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB09TIM-E3.fm]
model name [MHC-GNX100/GNX90/GNX80/GNX88/GNX70/GNX77/GX9900/GNX60/GNX66]
[2-547-453-11(2)] GB
38
GB
Press ILLUMINATION repeatedly to select
the power illuminator you want when the
system is turned on.
Each time you press the button, the power
illuminator changes cyclically as follows:
PATTERN 1 t PATTERN 2 t
PATTERN 3 t PATTERN 4 t
PATTERN OFF
Notes
• When you turn MASTER VOLUME (or press
VOLUME +/– on the remote), power illuminator
shows the current volume level.
• During the demonstration display, you can turn on or
off power illuminator by pressing ILLUMINATION.
You can check the elapsed playing time and
remaining time of the current track or current
disc.
When a CD-TEXT disc or a disc with MP3
audio tracks is loaded, you can also check the
information recorded on disc, such as the titles.
When the system detects CD-TEXT discs,
“CD TEXT” lights up in the display.
Checking the elapsed playing
time, remaining time and
titles
Press DISPLAY repeatedly during
playback.
Each time you press the button, the display
changes cyclically as follows:
Elapsed playing time of the current track t
Remaining time of the current track
1)
t
Remaining time of the current disc
2)
t Title of
the current track
3)
t Title of the current album
(for a few seconds)
4)
t Clock display
5)
(for 8
seconds) t Effect status (for 8 seconds)
1)
“--.--” appears while an MP3 audio track is played
back.
2)
“--.--” appears in the following cases:
– while an MP3 audio track is played back.
– All play modes except “1DISC” or “ALBM”.
3)
Only for CD-TEXT discs and a discs with MP3
audio tracks.
When the CD-TEXT disc contains more than 20
tracks, the title of current track is not displayed from
track 21 onwards.
4)
Only for discs with MP3 audio tracks.
5)
“--.--” appears in the display if you have not set the
clock.
Changing the power
illuminator
Viewing information
about the disc in the
display