Filter
Top Products
Disc – Playback
masterpage:Right
\
Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB06CDP-
model name[MHC-GNX100/GNX90/GNX80/GNX88/GNX70/GNX77/GX9900/GNX60/GNX66]
[2-547-453-11(2)] GB
17
GB
You can play back all the tracks or a single track
on a disc repeatedly.
Press REPEAT on the remote repeatedly
during playback until “REPEAT” or
“REPEAT1” lights up in the display.
REPEAT: All the tracks on the disc(s), or all the
tracks in the album* are played back repeatedly
up to five times.
REPEAT1: A single track is played back
repeatedly until “REPEAT1” is cancelled.
* When “ALBM” or “ALBM SHUF” is selected for
MP3 audio tracks.
To cancel Repeat Play
Press REPEAT repeatedly until both
“REPEAT” and “REPEAT1” disappear from
the display.
Note
You cannot select “REPEAT” and “ALL DISCS
SHUF” at the same time.
Tip
You can change the Repeat Play setting when the
playback is stopped.
You can make a program of up to 25 steps from
all the discs in the order you want to play back.
You can synchro record the programmed tracks
onto a tape (page 24).
1 Press CD.
2 When playback is stopped, press PLAY
MODE on the remote repeatedly until
“PROGRAM” lights up in the display.
3 Press one of DISC 1 ~ 3 buttons or
EX-CHANGE/DISC SKIP (or DISC SKIP
on the remote) to select a disc.
To program all the tracks on a disc at once,
proceed to step 5 while “AL” appears in the
display.
To program all the MP3 audio tracks on
an album at once, turn and hold
ALBUM +/– clockwise or
counterclockwise and release it at the
album you want (or press ALBUM +/– on
the remote repeatedly until the album you
want appears in the display), then proceed
to step 5.
Playing repeatedly
— Repeat Play
Creating your own
program
—Program Play
continued