Filter
Top Products
masterpage:Left
\
Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB06CDP-
model name[MHC-GNX100/GNX90/GNX80/GNX88/GNX70/GNX77/GX9900/GNX60/GNX66]
[2-547-453-11(2)] GB
16
GB
Other operations
1)
The elapsed playing time may not be displayed
correctly depending on the MP3 audio tracks.
2)
(MHC-GNX88/GNX77/GNX66 only)
You cannot find a point in a track when playing a
CDG.
Notes
• You cannot change the play mode during playback.
• Some time may be needed to start playback of discs
recorded in complex configurations such as many
layers.
• When the disc is loaded, the system reads all the
tracks on that disc. If there are many albums or non-
MP3 audio tracks on the disc, it may take a longer
time for playback to begin or for the next MP3 audio
tracks to start playback.
• You are recommended not to save other types of
tracks or unnecessary albums on a disc that has MP3
audio tracks.
• When naming the MP3 audio tracks, be sure to add
the file extension “.MP3” to the file name.
• An album that does not include an MP3 audio track
is skipped.
• If you save up the extension “.MP3” to a track other
than MP3 audio tracks, the system cannot recognize
the track properly and will generate a random noise
which could damage your speaker.
• This system can play back MP3 audio tracks in the
format of MPEG 1 Audio Layer 3, MPEG 2 Audio
Layer 3 and MPEG 2.5 Audio Layer 3.
• The maximum number of albums on a disc which can
be recognize by this system is 150 (including root
album).
• The maximum number of MP3 audio tracks and
albums on a disc which can be recognize by this
system is 300.
• Depending on the encoding/writing software,
recording device, or the recording media used at the
time an MP3 audio track is recorded, you may
encounter problems such as cannot play back, sound
interruptions and noise.
Tips
• When you press CD or one of the DISC 1 ~ 3 buttons
to switch to “CD” function from “TUNER” function,
you may require a longer time to access the disc. In
the case, set the CD power manage function to “CD
POWER ON” (page 20).
• If you press CD while the system is turned off, the
system turns on automatically and “CD” is selected
as the function.
• You can also press FUNCTION on the remote
repeatedly to select “CD”.
• (MHC-GNX88/GNX77/GNX66 only)
When you play back a CDG, some operation may
cause image distortion on the video output.
• During Shuffle Play, some tracks may be played
back repeatedly.
To Do this
Stop playback Press x.
Pause playback Press X. Press X again to resume
playback.
Select a track Turn . > clockwise or
counterclockwise (or press –.
or >+ on the remote
repeatedly).
Select an album
of MP3 audio
tracks
Turn and hold ALBUM +/–
clockwise or counterclockwise
and release it at the album you
want (or press ALBUM +/– on the
remote repeatedly).
Find a point in a
track
1)2)
For audio CD, turn and hold
m M clockwise or
counterclockwise and release it at
the point you want (or press m
or M repeatedly on the remote).
For MP3 audio track, press m or
M repeatedly on the remote.
Select a disc
when playback is
stopped
Press one of the DISC 1 ~ 3
buttons or EX-CHANGE/DISC
SKIP (or DISC SKIP on the
remote).
Switch to CD
function from
another source
and start
playback
automatically
when there is a
disc
Press one of the DISC 1 ~ 3
buttons (Automatic Source
Selection).
Exchange other
discs while
playing
Press EX-CHANGE/DISC SKIP.
Remove a disc Press Z OPEN/CLOSE.