Filter
Top Products
11
EN
To tune in a station with a weak
signal
For European model
Press TUNING MODE repeatedly until
“TUNING” appears in step 2, then turn
MULTI CONTROLLER to tune in the desired
station.
For other models
Press MANUAL in step 2, then turn MULTI
CONTROLLER to tune in the desired station.
To change the preset number
Start over from step 1.
To change the AM tuning interval
(except for European model)
The AM tuning interval is factory-preset to
9 kHz. To change the AM tuning interval,
tune in any AM station first, then turn off the
power. While holding down the ENTER/
NEXT button, turn the power back on. When
you change the interval, all the preset stations
will be erased. To reset the interval, repeat
the same procedure.
Tip
The preset stations are retained for a week even if
you pull off the power cord or if a power
interruption occurs.