Filter
Top Products
9
Note
When setting the time, set the equalizer display to
anything other than Spectrum analyzer pattern 3
(See “To change the equalizer display” on page 35).
43,5
6
21
Æ‚
⁄
„
0)
POWER
Step 3: Setting the
time
You must set the time before using the timer
functions.
1 Press CLOCK/TIMER SET.
The hour indication flashes.
2 Turn the jog dial to set the hour.
The clock is on a 12-hour system.
3 Press ENTER/NEXT.
The minute indication flashes.
4 Turn the jog dial to set the minute.
5 Press ENTER/NEXT.
The clock starts working.
Tips
• If you’ve made a mistake, start over from step 1.
• Setting the time deactivates the demo mode .
If you want to display the demo mode, press
DISPLAY/DEMO when the power is off.
Æ‚
⁄
„
0)
1 3,52,4
n
Step 4: Presetting
radio stations
You can preset up to 40 stations, 20 for FM, 10
for MW and 10 for SW. For North and South
American, Australian and Thai models, you
can preset up to 30 stations, 20 for FM and 10
for AM.
1 Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Every time you press this button, the
band changes as follows:
North and South American, Australian
and Thai models:
FM ˜ AM
Other models:
FM n MW n SW
continued