Filter
Top Products
41
Timer-recording radio
programs
To timer-record, you must preset the radio
station (see “Step 4: Presetting radio
stations”) and set the clock (see “Step 3 :
Setting the time”) beforehand.
Æ‚
…
„
Ȯ
⁄
⁄ ⁄
„
0)
…
„
Ȯ
7 2 3,4,5
TIMER SELECT
6
1 Tune in the preset radio station (see
“Listening to the radio”).
2 Press CLOCK/TIMER SET.
“SET (DAILY 1)” appears.
To check the setting
Press TIMER SELECT and turn the jog dial to
select the respective mode (DAILY 1 or
DAILY 2), then press ENTER/NEXT. To
change the setting, start over from step 1.
To cancel the timer operation
Press TIMER SELECT and turn the jog dial to
select “OFF”, then press ENTER/NEXT.
Tip
The power turns on 15 seconds before the preset
time.
Note
When setting the wake-up timer, set the equalizer
display to anything other than Spectrum analyzer
pattern 3 (See “To change the equalizer display” on
page 35).
continued