Filter
Top Products
40
Waking up to music
— Wake-up Timer
5 Set the time to start playback.
Turn jog dial to set the hour, then press
ENTER/NEXT.
The minute indication starts flashing.
Turn jog dial to set the minute, then
press ENTER/NEXT.
The hour indication flashes again.
6 Set the time to stop playback
following the above procedure.
7 Turn jog dial until the music source
you want appears.
The indications change as follows:
TUNER n CD PLAY n TAPE PLAY
8 Press ENTER/NEXT.
The start time, followed by the stop time
and the music source, appears, then the
original display appears.
9 Turn off the power.
You can wake up to music at a preset time
every day. Make sure you have set the clock
(see “Step 3: Setting the time”).
3 4,5,6,7,8
VOLUME
1
Æ‚
⁄
„
0)
9
TIMER SELECT
2
1 Prepare the music source you want
to play.
• CD: Insert a CD. To start from a
specific track, make a program (see
“Programming the CD tracks”).
• Tape: Insert a tape with the side you
want to play facing forward.
• Radio: Tune in the preset station you
want (see “Step4: Presetting radio
stations”).
2 Adjust the volume.
3 Press CLOCK/TIMER SET.
“SET (DAILY 1)” appears.
4 Turn jog dial to select DAILY 1 or 2,
then press ENTER/NEXT.
“ON” appears and the hour digits flash
in the display.
VOLUME
1