Filter
Top Products
28
Recording a CD by
specifying track order
— Program Edit
1 Place a CD and insert a blank tape
into deck B.
2 Press FUNCTION repeatedly until
“CD” appears in the display.
3 Press PLAY MODE repeatedly until
“PROGRAM” appears in the
display.
4 Press one of the DISC 1~3 buttons to
select a CD.
5 Turn the jog dial until the desired
track appears in the display.
6 Press ENTER/NEXT.
The track is programmed. “STEP” and
the programmed playing order appear,
followed by the total playing time.
7 To program additional tracks to be
recorded on side A, repeat steps 4 to
6.
Skip step 4 to select tracks from the same
disc.
You can record tracks from all the CDs in the
order you want. When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
VOLUME
1DISC PROGRAM
Previously selected track
Total playing time
Total playing time
(including selected track)
Disc number
VOLUME
1DISC PROGRAM
Track number
Æ‚
…
„
Ȯ
⁄
⁄ ⁄
„
0)
…
„
Ȯ
POWER
4
$
4
$
)0P
+=p
Æ
Æ»
Æ»
CHECK
1
1
2
3
5
4
6
1012
11
8