Filter
Top Products
Basic Operations
19
Recording from the
radio
You can record the radio program on a tape
by calling up a preset station. You can use
TYPE I (normal) or TYPE II (CrO2) tapes. The
recording level is automatically adjusted.
1 Press TUNER/BAND to select the
band you want.
2 Press TUNING MODE so that
“PRESET” appears in the display.
3 Turn the jog dial to tune in a preset
station.
Æ‚
…
„
Ȯ
⁄
⁄ ⁄
„
0)
…
„
Ȯ
POWER
1
236
5
74
Turn clockwise
for higher
preset numbers.
Turn counter-
clockwise for
lower preset
numbers.
+–
TUNED
STEREO
MHz
VOLUME
PRESET
Preset number
Frequency
DOLBY NR
4 Press § EJECT and insert a blank
tape into deck B.
5 Press r.
Deck B stands by for recording.
6 Press DIRECTION repeatedly to
select A to record on one side.
Select a (or RELAY) to record on
both sides.
7 Press on deck B.
Recording starts.
To stop recording
Press on deck B.
Tips
•If you want to record from the reverse side, press
ª so that ª (for reverse side) lights up.
•When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
•To record non-preset stations, select “MANUAL”
in step 2, then turn the jog dial to tune in the
desired station.
•When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR B” appears after pressing r.
•If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
With the side
you want to
record facing
forward
⁄
…
„
Ȯ