Filter
Top Products
Basic Operations
21
Tips
•Pressing · or ª when the power is off
automatically turns the power on and starts tape
playback if there is a tape in the deck (One Touch
Play).
• You can switch from another source to the tape
deck just by pressing · or ª (Automatic Source
Selection).
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR B” appears.
• When dubbing tapes originally recorded with
Dolby NR B, the dubbed tape is automatically
played with Dolby NR B.
Recording from a
tape
— High-speed Dubbing
You can use TYPE I (normal) or TYPE II
(CrO2) tapes. The recording level is
automatically adjusted.
1 Press § EJECT and insert a
recorded tape in deck A and a blank
tape in deck B.
2 Press HIGH SPEED DUBBING.
Deck B stands by for recording.
With the side
you want to
play/record
facing forward
Æ‚
…
„
Ȯ
⁄
⁄ ⁄
„
0)
…
„
Ȯ
POWER
1241
3
DOLBY
NR
⁄
…
„
Ȯ
continued