Filter
Top Products
15
Getting Started
Hooking Up the Audio
Components
Hook up a mixer, CD player, DAT recorder, and other
components to the MD recorder. Be sure to turn off the
power of each component to do so.
ANALOG(BAL)
OUTPUT
LEVEL
LINR L
L
5
010
OUT
OUT
OUT
ANALOG(UNBAL)
ANALOG
INPUT
LEVEL
DIGITAL
COAXIAL
IN
IN
IN
PARALLEL
RELAY
REMOTE
OUT IN
RS-232C
R
R
+4dBu -10dBu
CTRL-S
PUSH PUSH
Mixer
Mixer
VOLTA GE
SELECTOR
230V
120V
OUT
OUT
IN
IN
DIGITAL
COAXILAL OUT
DIGITAL
COAXILAL IN
CD player or
DAT recorder,
MD recorder
External
control component
External
control
component
Remote or
control
component
MDS-E12
To power outlet
ç : Flow of signal
z When the remote is used as the wired remote
Use the supplied control S cable to connect the jack at
the front of the remote with the control jack of the
recorder.
When the recorder and remote are connected by the
control S cable, infrared rays are not emitted from the
remote and infrared rays are not received by the
recorder.
When the remote is used as the wireless remote,
unplug from the jacks of the recorder and remote.
1 Prepare necessary connecting cables.
• Audio connecting cable (pin type)
White White
Left (L) Left (L)
Right (R) Right (R)
Red Red
• Audio connecting cable (XLR type)
• Coaxial digital connecting cable VMC-10
• Control-S cable (accessory)
(Mini-jack)
• Relay record/play cable (RK-G136)
(Stereo-Mini-jack type) (Stereo-Mini-jack type)
2 Connect.
xWhen connecting with analog components
Use the connectors and switch in the figure below.
Change the INPUT selector on the front panel depending
on the type of the input connector to be used.
Connector to which the Position to adjust the INPUT
program source is selector
connected
UNBAL IN UNBAL
(pin type)
BAL IN BAL
(XLR type)
z A signal is output to both the UNBAL and BAL output
terminals regardless of the setting of the INPUT switch
z When the BALANC output (XLR type) terminals is used, the
output level can be changed by the OUTPUT LEVEL selector
ANALOG(BAL)
OUTPUT
LEVEL
LINR L
L
5
010
OUT
OUT
OUT
ANALOG(UNBAL)
ANALOG
INPUT
LEVEL
DIGITAL
COAXIAL
IN
IN
IN
PARALLEL
RELAY
REMOTE
OUT IN
RS-232C
R
R
+4dBu -10dBu
CTRL-S
PUSH PUSH
VOLTA GE
SELECTOR
230V
120V
ANALOG BLANCE
I/O terminal
ANALOG UNBLANCE
I/O terminal
OUTPUT LEVEL
selector