Filter
Top Products
7
US
Preparation
Processor Part Descriptions
Contact pin
/ (on/standby) button
Power indicator
Lights up in green while emitting RF signals.
Decode Mode indicators
(See page 19 for details.)
COMPRESSION switch
(See page 18 for details.)
EFFECT switch
(See page 17 for details.)
Slide to select the sound field (CINEMA/
GAME/VOICE (STEREO)/OFF).
INPUT switch
(See page 17 for details.)
Slide to select the input source (DIGITAL/
ANALOG).
DC IN 6V jack
Connect the supplied AC power adaptor to
this jack. (Be sure to use the supplied AC
power adaptor. Using products with a different
plug polarity or other characteristics can cause
a malfunction.)
ATT (attenuator) switch
Set this switch to “0 dB” if the volume is too
low for analog input. Normally, this switch
should be set to “–8 dB.”
Location and Function of Parts
(Continued)