Filter
Top Products
13
US
Connection
Connecting the processor to digital components
Use the supplied optical digital connecting cable to connect the optical digital output jack on a
BD/DVD device, digital satellite/TV receiver, GAME device or other digital component
*
to the
DIGITAL IN jack of the processor.
The connected AV component may need to be set up for optical digital output. Refer to the
operating instructions of the connected device.
To DIGITAL IN jack
Processor
To optical digital
output jack
Optical digital connecting cable (supplied)
Match the orientation of the plug with
the jack, and then insert until the plug
fits into place.
Notes
The optical digital connecting cable is an extremely high-precision device and is sensitive to jolts and
external pressure. Therefore, be careful when inserting and removing the cable plug.
The digital input for the processor does not support sampling frequencies of 32 kHz/96 kHz. Set the
digital output setting of the BD/DVD device to 48 kHz/44.1 kHz when using this system. Noise may be
heard when a 32 kHz/96 kHz digital signal is input. If this happen, connect an audio cord to the LINE IN
(L/R) jacks, and enjoy the audio via the analog input.
*
Connection to the optical digital output jack on your personal computer is not guaranteed to work with
this system.
DTS
A DTS-compatible BD/DVD device is required for playback of BD/DVDs recorded in DTS audio. (For
more details, refer to the operating instruction of your BD/DVD device.)
When playing CDs recorded in DTS format, noise may occur when fast forwarding or rewinding. This is
not a malfunction.
If the DTS digital output is set to “OFF” on the BD/DVD device, no sound may be heard even if the DTS
output is selected in the BD/DVD menu.
Connection
Connecting the Headphone System
BD/DVD device, digital
satellite/TV receiver, GAME
device or other digital
component having an
optical digital output jack
(Continued)