Filter
Top Products
8
Connecting optional
AV components
To enhance your system, you can connect
optional components. Refer to the
instructions included with each component
for details.
Connecting audio
components
Connecting a turntable
Be sure to match the color of the plugs and
the connectors. To listen to the sound from
the connected turntable, press FUNCTION
repeatedly until “PHONO” appears.
Note
Using the turntable at high volume may cause
distortion or howling. This is often caused by the
bass sound from the speakers. The bass sound may
be picked up by the needle of the turntable, and
produce the distortion or howling. To avoid this, do
the following:
1Keep some distance between the speakers and the
turntable.
2Stop using the surround effect.
3Install the speakers or the turntable on a firm and
stable surface.
4Press DBFB repeatedly until “DBFB
”
disappears from the display (LBT-D290/G3300/
XB3/XB3K/XB30 only).
Press SUPER WOOFER repeatedly until the
indicator on this button goes off (except for LBT-
D290/G3300/XB3/XB3K/XB30).
Connecting surround speakers
(LBT-D590/D690/D990/XB600/XB6/XB6K
only)
You can connect optional surround speakers.
Note
You need to connect both left and right surround
speakers. Otherwise, the sound will not be heard.
Connecting a VCR
Be sure to match the color of the plugs and
the connectors. To listen to the sound from
the connected VCR, press FUNCTION
repeatedly until “VIDEO” appears.
To the audio output of the VCR
To the audio output of the turntable
To surround
speaker (L)
To surround
speaker (R)