Filter
Top Products
36
4 Set the time to start recording.
Press TUNING +/– to set the hour, then
press ENTER/NEXT.
The minutes indication flashes.
Press TUNING +/– to set the minutes,
then press ENTER/NEXT.
The hour indication flashes again.
5 Set the time to stop recording
following the above procedure.
The start time, the stop time, the
recording source, and the preset station
appear in turn before the original display
returns.
6 Insert a blank tape in deck B.
7 Turn off the system.
When recording starts, the volume level
is set to the minimum.
Timer-recording radio programs
(continued)
To check the setting
1 Press REC.
2 “TIMER OFF” appears in the display.
3 Press REC again.
To change the setting, start over from step 1.
To cancel the timer operation
1 Press REC.
2 “TIMER OFF” appears in the display.
Notes
•The system turns on 15 seconds before the preset
time.
•If the system is on at the preset time, the recording
will not be made.
•You cannot set the timer if the timer on and off
times are the same.
•When you set the Sleep Timer, the Timer-
recording will not start until the Sleep Timer turns
off the system.
•You cannot activate the Wake-up Timer and
Timer-recording at the same time.
•Recording starts from the front side.
LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K/XB30
LBT-D690/D990/XB600/XB6/XB6K
DISCALL
DOLBYNR
OFF
REC
S
DOLBYNR
OFF
REC
ALL DISC S