Filter
Top Products
12
Recording a CD
— CD Synchro Recording
4 Close the front cover.
5 Press DISC SKIP repeatedly until
the disc number you want to record
appears in the playing position
indicator.
6 Press CD SYNC.
Deck B stands by for recording and the
CD player stands by for playback, and
the indicator on the · button (for the
front side) lights up green.
7 Press DIRECTION repeatedly to
select A to record on one side or
ß (or RELAY) to record on both
sides.
8 Press P on deck B.
Recording starts.
To stop recording
Press p on deck B or on the CD player.
Tips
•If you want to record on the reverse side, press ª
so the indicator on the ª button (for the reverse
side) lights up green.
•When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
•When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR
before step 8 so “DOLBY NR B” appears in the
display.
•To record with the surround effect, press
SURROUND so “SUR
” appears in the
display.
The equalizer settings will not be recorded.
Note
You cannot listen to other sources while recording.
This function lets you record from a CD to a
tape easily. You can use TYPE I (normal) or
TYPE II (CrO2) tapes. The recording level is
adjusted automatically.
1 Press POWER (I/u for LBT-D990/
XB30) to turn on the power.
2 Press 6 EJECT and insert a blank
tape into deck B.
3 Press 6 OPEN and place a CD.
23
6
7
8
4
p
SURROUND
DOLBY NR p
ª
ª
ª
6
Pr
0)
6
ª
Pp
ª
ª
p
6
0)p
)
0
With the label
side up.
When you play
a CD single,
place it on the
inner circle of
the tray.
With the side you want to
record on facing forward
ª
ª
6
Pr
0)
6
ª
ª
p0)p
5
1