Filter
Top Products
5
2 Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
3 Set VOLTAGE SELECTOR to the
position of your local power line
voltage (except for North American,
Malaysian, Mexican, and Australian
models).
4 Connect the power cord to a wall
outlet.
The demonstration appears in the
display.
If the plug on this unit does not fit your
wall outlet, detach the supplied adapter
from the plug (except for North and
South American countries, Australia,
and Malaysia).
5 Deactivate the demonstration mode
by pressing DISPLAY/DEMO while
the system is off.
Inserting two size AA (R6)
batteries into the remote
Tips
•With normal use, the batteries should last for
about six months. When the remote no longer
operates the system, replace both batteries with
new ones.
•When you set the time, the demonstration is
deactivated.
To activate the demonstration again, press
DISPLAY/DEMO while the system is off.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
When carrying this system
Do the following to protect the CD
mechanism.
1 Press FUNCTION repeatedly until “CD”
appears in the display.
2 Hold down PLAY MODE and press
POWER (I/u for LBT-D990/XB30) to turn
off the system.
VOLTAGE SELECTOR
110-120V 220-240V
AM loop antenna
Extend the FM wire
antenna horizontally.
FM75
AM