15
Basic Operations
Playing a tape
You can play any type of tape, TYPE I
(normal), TYPE II (CrO2) or TYPE IV (metal).
The deck automatically detects the tape type.
To select either deck A or B, press DECK A
( or DECK B ( on the remote.
continued
223
44
pP
0/
)
p
VOLUME
DOLBY NR
0/
)
1
p
0/)
P
DECK A (
DECK B (
VOLUME +/–
Tips
• If you want to record on the reverse side, press ª
so the indicator on the ª button (for the reverse
side) lights up green.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, select “MANUAL”
in step 3, then press TUNING +/– to tune in the
desired station.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR
before step 8 so “DOLBY NR B” appears in the
display.
• To record with surround effect, press
SURROUND so “SUR ” appears in the
display.
The equalizer settings will not be recorded.
• If noise is heard while recording from the radio,
move the appropriate antenna to reduce the noise.