Filter
Top Products
Basic Operations4
EN
Inserting the batteries
Basic Operations
To operate the unit with house current or car battery, refer
to “Operating with house current or car battery” on page 33.
1 Push the OPEN tabs and remove
the RADIO BATT and TAPE
BATT battery holders.
2 Insert two R6 (size AA) batteries
into the RADIO BATT battery
holder and insert one R6 (size
AA) battery into the TAPE BATT
battery holder.
Note
It is not necessary to insert a battery
into the TAPE BATT battery holder if
you wish to operate the radio only.
However, to use the cassette, insert
the batteries into both the RADIO
BATT and TAPE BATT battery
holders.
Otherwise, the unit may not operate
properly.
3 Insert both battery holders back
into the unit.
Insert until it clicks.
Insert the batteries to operate the unit with
batteries.
Insert the batteries into both battery holders
when using the cassette.
RADIO BATT
TAPE BATT
]
}
}
]
Insert with the correct
‘’ polarity as
indicated.
]
}