Sony ICF-SW1000T Stereo System User Manual


 
Cassette24
EN
Tips
When the supplied
microphone is connected,
power is supplied from
the unit.
The supplied microphone
is a plug-in-power type
and should be connected
to MIC jacks of cassette
recorders that are
compatible with the plug-
in-power type only.
To prevent accidental
operations of the buttons,
use the hold function (see
page 30).
Using the supplied microphone
The clip of the supplied microphone can be swiveled
in the desired direction and fastened for your
convenience.
Notes on recording
Recording level
The recording level is fixed. Adjusting VOLUME and
TONE does not affect the sound to be recorded.
Recording with the supplied microphone
Before inserting a cassette, make sure that the
cassette tab is not broken off. A cassette with a
broken tab cannot be recorded to prevent accidental
recording of your important cassette. If you wish to
use the cassette for recording again, cover the
opening of the broken tab with adhesive tape.
Operate REC approximately 2 seconds prior to the
point you wish to begin recording. If not, the
leading segment may not be recorded.
Switching the recording side is not possible when
œ is pressed during recording.