Filter
Top Products
41
Additional Information
Changing the factory setting of a function
button
If the factory settings of the SYSTEM CONTROL/
FUNCTION buttons don’t match your system
components, you can change them. The following table
shows the possibility of alternate function assignment for
each button.
• Initial setting of VIDEO is VTR 3.
• Sony VCR’s are operated with a VTR 1, 2, or 3 setting
that corresponds to Beta, 8mm and VHS, respectively.
Resetting key table for function key VIDEO
Resetting key table for function key DVD, AUX
Note
There is no initial setting for AUX. You need to reset this key
according to the equipment connected to the AUX input jack.
SYSTEM
CONTROL/
FUNCTION
MENU
control keys
P
p
(
0
)
TV VIDEO
5.1 CH
DVD
AUX
SYSTEM
STANDBY
VTR CH TV VOL
TV CH
ANT
TV/VTR
TV/
VIDEO
MENU DISPLAY
ENTER/EXECUTIVE
EXIT/RETURN
TITLE
SLEEP
AV
? / 1
? / 1
Possible assignment
VTR1, VTR 2, VTR 3
DVD, LDP, CD
Button
VIDEO
DVD, AUX
VTR 1
VTR 2
VTR 3
CURSOR UP
ENTER/EXECUTE
CURSOR DOWN
DVD
LD
CD
EXIT/RETURN
DISPLAY
CURSOR RIGHT
For example, if you connect a Sony LD player to the DVD
jacks, you can assign the DVD button to set the remote to
control the LD player.
1 Hold down the SYSTEM CONTROL/FUNCTION
button whose function you want to change (DVD, for
example).
2 Press the corresponding button of the component
you want to assign to the SYSTEM CONTROL/
FUNCTION button (DISPLAY, LD player, for
example).
Now you can use the DVD button to control your Sony
LD player.
To reset a button to its factory setting
Repeat the above procedure.
To reset all the function buttons to their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at the same time.