Filter
Top Products
39
Additional Information
Press
Press button repeatedly to
select
Press + /– button to select See page
EFFECT LEVEL depends on sound mode (in 16 steps)
Settings Using SURR, LEVEL, and SET UP buttons
You can make various settings using the LEVEL, SURR, SET UP buttons, and + /– buttons. The table below shows each of
the settings that these buttons can make.
29
WALL TYPE between –8 to +8 (in 1 increment steps)
REVERBERATION TIME between –8 to +8 (in 1 increment steps)
FRONT BALANCE
between –8 to +8 (in 1 increment steps)
REAR BALANCE
between –8 to +8 (in 1 increment steps)
CENTER LEVEL
between –10 dB to +6 dB (in 1 dB steps)
SUB WOOFER LEVEL
between –10 dB to +6 dB (in 1 dB steps)
LEVEL button
REAR LEVEL between –10 dB to +6 dB (in 1 dB steps)
30
L
R
(FRONT) LARGE or SMALL
C
(CENTER) LARGE, SMALL, or NO
LS
RS
(REAR) LARGE, SMALL, or NO
REAR PL. PL. SIDE or PL. BEHD.
REAR HGT. HGT. LOW or HGT. HIGH
SUB WOOFER S.W. YES or S.W. NO
L
R
(FRONT) XX.X METER between 3 feet (1.0 meters) and 40 feet (12.0
meters) (in 1 foot (0.1 meter) steps)
C
(CENTER) XX.X METER between FRONT and 5 feet (1.5 meters) (in 1 foot
(0.1 meter) steps)
LS
RS
(REAR) XX.X METER between FRONT and 15 feet (4.5 meters) (in 1
foot (0.1 meter) steps)
SET UP
* When you press the SET UP button, you can select NORM. SP. (for normal speakers) or MICRO SP. (for Micro Satellite speakers).
(page 15)
SURR button
* Speaker type NORM. SP. or MICRO SP.
15