Filter
Top Products
Chapter 10
Setup Menus
10-26
Chapter 10
Setup Menus
10-4 Items in the Extended Setup Menu
Item name SettingsItem number
726 H BLANKING WIDTH Select the horizontal blanking width of the video output signal.
NAROW : Digital blanking (narrow)
WIDE: Analog blanking (wide)
When WIDE is selected, the horizontal blanking width complies with RS170A, and
normally the blanking is widened and the image becomes narrower. It is
recommended to select NAROW at the editing stage, then later, for broadcast
transmission to select WIDE, to output a signal conforming to the standard.
727 VIDEO EDIT PREVIEW
SWITCHER
Set the output phase for the video playback signal when any of the ASSEMBLE,
VIDEO, AUDIO CH1 to CH4, CUE and TC buttons is lit.
INT : The video playback signal output phase is the same as the output phase in
E-E mode. Use this setting when editing with a single VTR, or when
previewing while watching the VTR output signal.
EXT: The video playback signal output phase is the same as the phase of an
input video signal or external reference signal.
728 OUTPUT SCH PHASE Set the subcarrier H phase.
0 to 800H to FFFH
740
MASTER LEVEL (HD)
Adjust the high-definition video signal output from the HDSDI OUITPUT
connector.
This adjusts the Y, PB, and PR levels simultaneously.
0.0%(0H) to 100%(800H) to 141.3% (B4EH)
741
Y LEVEL (HD)
Adjust the Y level of the high-definition video signal output from the HDSDI
OUITPUT connector.
0.0% (0H) to 100% (800H) to 141.3% (B4EH)
732 COMPOSITE MODE Select the chroma filter through which the composite video output signals pass.
WIDE : Output via SMPTE wide
STD: Output via SMPTE standard (narrow)
742 PB LEVEL (HD) Adjust the PB level of the high-definition video signal output from the HDSDI
OUTPUT connector.
0.0% (0H) to 100% (800H) to 141.3% (B4EH)
Control the H sync phase of the high-definition video signal output from the
HDSDI OUTPUT connector according to the menu.
0 to 80H to FFH
Fine control the H sync phase of the high-definition video signal output from the
HDSDI OUTPUT connector according to the menu.
0 to 3FFH
743
PR LEVEL (HD) Adjust the PR level of the high-definition video signal output from the HDSDI
OUTPUT connector.
0.0% (0H) to 100% (800H) to 141.3% (B4EH)
745 SETUP LEVEL (HD) Adjust the setup level (59.94i, 29.97PsF mode)/black level (50i, 25PsF mode) of
the high-definition video signal output from the HDSDI OUTPUT connector.
0 to 110H to 220H
746
SYNC PHASE (HD)
747
FINE (HD)
Menu items in the range 700 to 799, relating to video control (Continued)