Filter
Top Products
47
DHCMD5 3-858-047-12.EN (1)
General
Power requirements 220 – 230 V AC, 50/60 Hz
Power consumption 130 watts
Dimensions
Amplifier/Tuner/MD/CD section:
Approx. 280 × 240 × 360
mm (11
1
/8 × 9
1
/2 × 14
1
/4
in) (w/h/d) incl.
projecting parts and
controls
(U.K. model)
Approx. 280 × 240 × 350
mm (11
1
/8 × 9
1
/2 × 13
7
/8
in) (w/h/d) incl.
projecting parts and
controls
(Other models)
Speakers: Approx. 205 × 325 × 290
mm (8
1
/8 × 12
7
/8 × 11
1
/2
in) (w/h/d) incl.
projecting parts and
controls
Mass
Amplifier/Tuner/MD/CD section:
Approx. 9.4 kg
(20 lb 12 oz)
Speakers: Approx. 4 kg
(8 lb 14 oz) net per
speaker
Supplied accessories:
AM loop aerial (1)
Remote RM-S5MD (1)
Sony SUM-3 (NS)
batteries (2)
FM lead aerial (1)
Speaker cords (2)
Design and specifications are subject to change
without notice.
MD deck section
System MiniDisc digital audio
system
Laser Semiconductor laser
(λ=780nm)
Emission duration:
continuous
Laser output Max. 44.6 µW*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with a 7 mm aperture.
Recording time 74 minutes max. (using
MDW-74)
Sampling frequency 44.1 kHz
Frequency response 5 Hz to 20 kHz
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range 87.5 – 108.0 MHz
(50 kHz step)
Aerial FM lead aerial
Aerial terminals 75 ohm unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range
German model:
AM: 522 – 1,611 kHz
(with the interval set at
9 kHz)
Other models:
MW: 522 – 1,611 kHz
(with the interval set at
9 kHz)
LW: 144 – 288 kHz
(with the interval set at
3 kHz)
Aerial AM loop aerial
External aerial terminals
Intermediate frequency 450 kHz
Speaker
SS-MD5
Speaker system 3-way, bass-reflex type
Speaker units
Woofer: 15 cm dia., cone type
Tweeter: 5 cm dia., cone type
Super Tweeter: 2 cm dia., dome type
Nominal impedance 6 ohms