Filter
Top Products
Settings and Adjustments
63
GB
Adjusting the speaker
balance and level
1 Press DVD SETUP in stop mode.
The Setup Display appears.
2 Press X or x repeatedly to select
“SPEAKER SETUP”, then press
ENTER.
3 Press X or x repeatedly to select “TEST
TONE”, then press ENTER.
4 Press X or x repeatedly to select “ON”,
then press ENTER.
You will hear the test tone from each
speaker in sequence.
5 From your listening position, adjust the
value of “BALANCE” and “LEVEL”
using C/X/x/c.
The test tone is emitted from both left and
right speakers simultaneously.
6 Press ENTER when you have finished
making adjustments.
7 Press X or x repeatedly to select “TEST
TONE”, then press ENTER.
8 Press X or x repeatedly to select
“OFF”, then press ENTER.
Note
When you adjust the speaker settings, the sound cuts
off for a moment.
Tip
To adjust the balance or the level without listening to
the test tone, select “BALANCE” or “LEVEL” in step
3 and press ENTER. Then adjust the balance or level
using X/x and press ENTER.