Filter
Top Products
52
GB
Controlling the TV
You can control your TV using the buttons
below.
Note
Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
* Use for selecting the channel number greater than
10.
Tip
Depending on the TV manufacture, the following
method works. For double-digit number, press
-/-- first and then number. (For example, for channel
25, press -/--, then 2 and 5.)
You can use VCRs or other units connected to
the VIDEO 1 or VIDEO 2 jacks. Refer to the
operation manual supplied with the unit for
further information on the operation.
Press FUNCTION repeatedly until VIDEO 1
or VIDEO 2 that you connected the unit to
appears in the front panel display.
Each time you press FUNCTION, the mode of
the system changes in the following sequence.
TUNER FM t TUNER AM t VIDEO 1 t
VIDEO 2 t TV* t DVD t
TUNER FM t ...
* When selecting the TV, TV sound is output.
By pressing You can
TV [/1 Turn the TV on or off.
TV/VIDEO Switch the TV’s input source
between the TV and other input
sources.
Button TV
1~9, 10/0 Selects the TV Channels.
(1-10 CH)
. TV CH –*
> TV CH +*
3 VOL +
# VOL –
Using the Video or Other
Unit
123
456
7
>
10
10/0
8 9
FUNCTION