Filter
Top Products
7
Getting Started
Unpacking
Check that you have the following items:
• AM loop antenna (1)
• FM wire antenna (1)
• Speakers (5)
• Subwoofer (1)
• Speaker cords (5 m x 4, 15 m x 2)
• Video cord (1)
• Remote commander (remote) RM-SS300 (1)
• Size AA (R6) batteries (2)
• Foot pads (24)
• Speakers – Connection and Installation (card) (1)
Inserting batteries into the remote
You can control the system using the supplied remote.
Insert two size AA (R6) batteries by matching the + and –
on the batteries. When using the remote, point it at the
remote sensor g on the system.
z
You can control TVs using the supplied remote
See page 51.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or lighting
apparatuses. Doing so may cause a malfunction.
• If you will not use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
Getting
Started
This section describes how to hook up
the system to the speakers, a TV
monitor with audio/video input jacks
and other video component. You
cannot connect this system to a TV
monitor which does not have a video
input connector. Be sure to turn off
the power of each component before
making the connections.