Filter
Top Products
51
Other Operations
Other
Operations
This chapter describes how to set the
remote for controlling the TV, listen to
the radio, etc.
Controlling the TV with the
Supplied Remote Z
If you adjust the remote signal, you can control your TV
with the supplied remote. Default setting is to control
Sony TVs with the g mark.
Controlling TVs with the remote
1 While holding down TV ?/1,
1 Enter your TV’s manufacturer’s code (see the
table on the next page) using the number
buttons.
2 Press ENTER.
2 Release TV ?/1.
Code numbers of controllable TVs
If more than one code number is listed, try entering them
one at a time until you find the one that works with your
TV.
Notes
• If you enter a new code number, the code number previously
entered will be erased.
• When you replace the batteries of the remote, the code number
may reset to 01 (Sony). Reset the appropriate code number.
TV ?/1
Number buttons
1 2 3
4 5 6
7 8 9
>10 10/ 0
ENTER