Filter
Top Products
22
Playing Discs
Customizing Sound Fields
By adjusting the surround parameters of the front, rear
and center speakers, you can customize the sound fields
to suit your particular listening situations.
Once you customize a sound field, the changes are stored
in memory indefinitely (unless the system is unplugged
for about a day). You can change a customized sound
field any time by making new adjustments to the
parameters.
See the table below for the parameters available in each
sound field.
To get the most from multichannel surround
sound
Position your speakers and do the procedures described
in “Speaker Setup” starting on page 14 before you
customize a sound field.
Adjustable parameters for each sound field
FRONT BAL. REAR BAL. REAR LEVEL CENTER LEVEL WOOFER LEVEL
AUTO FORMAT DECODE zz z z z
NORMAL SURROUND zz z z z
CINEMA STUDIO A zz z z z
CINEMA STUDIO B zz z z z
CINEMA STUDIO C zz z z z
V. MULTI DIMENSION zz z z z
V. SEMI-M. DIMENSION zzz
HALL zz z z z
JAZZ CLUB zz z z z
LIVE HOUSE zz z z z
GAME zz z z z
2 CH STEREO z z
Adjusting the level parameters
The level menu contains parameters that let you adjust
the balance and speaker volumes of each speaker. For
details of each parameter, refer to “xBalance” and
“xLevel” on page 16.
1 Start playing a program source encoded with
multichannel surround sound.
2 Press AMP MENU repeatedly on the remote.
<< LEVEL >> appears on the front panel display.
3 Sit at your listening position and select the item to
be adjusted using M/m.
4 Adjust the volume level using </,.
The adjusted value will appear on the front panel
display. If you do not operate the remote for a few
seconds, the value turned off and is stored in the
system.
z You can adjust the level of center/rear speakers and
subwoofer directly
Use the CENTER/REAR/WOOFER +/– buttons on the remote.