Filter
Top Products
Advanced Settings and Adjustments
99
US
9 Press X/x repeatedly to select [TEST
TONE], then press .
10Press X/x repeatedly to select [OFF],
then press .
Note
• When you adjust the speaker settings, the sound cuts
off for a moment.
•The test tone signals are not output from the HDMI
OUT jack.
Placing the surround speaker
(L) in the (R) position
Depending on the location of the wall outlet
(mains), you can also place the surround speaker
(L) (with the IR receiver) in the (R) position if
necessary.
1 Press AMP MENU.
2 Press X/x repeatedly until “SL SR
REVERSE” appears in the front panel
display, then press or c.
3 Press X/x to select the setting.
The default setting is underlined.
•OFF
: Sets the surround speaker (L) (with
the IR receiver) in the (L) position.
• ON: Sets the surround speaker (L) (with
the IR receiver) in the (R) position.
4 Press .
5 Press AMP MENU.
The AMP menu turns off.
AMP MENU
X/x/c,
With the cover opened.