Filter
Top Products
17
US
Getting Started – BASIC –
2 Remove the post cover, slide the speaker adaptor onto the post, adjust the height of the
speaker adapter, and secure it with the screws. (for all speakers)
Note
• Keep the post cover handy, so you can replace it later.
3 (For the surround speaker (L))
Connect the connector of the speaker cord to the speaker.
Screws
Speaker
adaptor
,
Post
Hook
(upper part)
,
Post cover
Screws
Loosen (but do
not remove) the
screws before
attaching.
About the height of the speaker
The height of the speaker top is A + 390 mm (15
3
/
8
inches).
(A: Between the top of the speaker adaptor and top of the
base.)
• Lowest position: A = 570 mm (22
1
/
2
inches), Speaker top =
960 mm (37
7
/
8
inches)
• Highest position: A = 910 mm (35
7
/
8
inches), Speaker top =
1,300 mm (51
1
/
4
inches)
Rear of the surround speaker (L)
Connector (gray)
Speaker cord
cont
i
nue
d