Filter
Top Products
Other Operations
81
US
Operating for the THEATRE
SYNC function
Point the remote to the direction of TV and
this system, then press THEATRE SYNC
once.
While transmitting the code from the remote, the
TV button flashes.
If this function does not work, change the
transmit time. The transmit time varies
depending on the TV.
To change the transmit time
Press and hold TV CH +* while entering the
code for transmit time (see the table) using
the number buttons.
The transmit time from the remote is selected.
If you successfully set the transmit time code,
the TV button flashes twice slowly. If the setting
is unsuccessful, the TV button flashes 5 times
quickly.
* Functions as both TV CH + and FUNCTION +
button.
Note
•This function is only for SONY TVs. (This function
may not work on some SONY TVs.)
• If distance between TV and this system is too far, this
function may not work. Install the system near the
TV.
•Keep the remote pointed in the direction of the TV
and this system while the TV button is flashing.
•Keep the remote pointed in the direction of the TV
and this system while entering the code.
You can enjoy multiplex broadcast sound when
the system receive the Dolby Digital multiplex
broadcast signal.
Press AUDIO.
Press AUDIO repeatedly until the signal you
want appears in the front panel display. The
default setting is underlined.
•MAIN
: Sound of the main language will be
output.
• SUB: Sound of the sub language will be
output.
• MAIN+SUB: Mixed sound of both the main
and sub languages will be output.
Note
• To receive the Dolby Digital signal, you need to
connect a digital satellite tuner to the system with a
digital cord (pages 39, 40) and set the digital output
mode of the digital satellite tuner to Dolby Digital.
By pressing Number Transmit time
TV CH + 1 0.5 (Default)
21
31.5
42
52.5
63
73.5
84
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
AUDIO
With the cover opened.