Filter
Top Products
Playing Discs
43
GB
When you stop a disc, the system remembers the
point where you pressed x and “Resume”
appears in the front panel display. As long as
you do not remove the disc, Resume Play will
work even if the system enters standby mode by
pressing "/1.
1 While playing a disc, press x to stop
playback.
“Resume” appears in the front panel
display, so you can restart the disc from the
point where you stopped the disc.
If “Resume” does not appear, Resume Play
is not available.
2 Press H.
The system starts playback from the point
where you stopped the disc in Step 1.
Notes
• You cannot perform Resume Play during Shuffle
Play or Program Play.
• Depending on where you stop the disc, the system
may not resume playback from exactly the same
point.
• The point where you stopped playing is cleared if:
– you change the play mode.
– you change the setting on the Setup Menu.
Tip
To play from the beginning of the disc, press x twice,
then press H.
Resuming Playback from
the Point Where You
Stopped the Disc
(Resume Play)
H
x