Playing Discs
41
GB
To turn on the system
Press "/1 on the system. The system turns on. In
standby mode, the system also turns on by
loading a disc.
To turn off the system
Press "/1. The system enters standby mode and
the standby indicator lights up in red. To turn off
the system completely, remove the AC power
cord (mains lead) from the wall outlet (mains).
While playing a disc, do not turn off the system
by pressing "/1. Doing so may cancel the menu
settings. When you turn off the system, first
press x to stop playback and then press "/1.
To save the power in standby
mode
Press "/1 while the system turns on (the standby
indicator on the system lights up).
To cancel standby mode
Press "/1 once.
Additional operations
* You cannot pause during JPEG playback.
Notes
• If there is no disc in the system, “No Disc” appears on
the front panel display.
• If DVD playback is paused for approximately one
hour, the system automatically turns off.
Tip
If a DVD has more than two titles, you cannot go to the
next title or go back to the preceding title by pressing
. or >. These buttons work only within a single
title. If you want to go to the next title or go back to
preceding title, press DVD TOP MENU or DVD
MENU and then select the title you want to go to from
the control menu.
To Press
Stop x
Pause* X
Resume play after pause X or H
Go to the next chapter,
track, scene, or file in
continuous play mode
>
Go back to the preceding
chapter, track, scene, or file
in continuous play mode
.
Stop play and remove the
disc
Z
Mute the sound MUTING. To cancel
muting, press it again
or VOL + to adjust the
sound volume.
X
H
./>
VOL +/–
MUTING
Z
x