Sony Z-L30 Stereo System User Manual


 
MULTI JOG
)
,,
.—
~, ;
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1
2
3
Press TUNER/BAND to select a band, and press
++ DOWN or ~UP to select a station.
Press II SET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to the station.
Frequency Preset number
Repeat steps 1 and 2.
No more stations will be stored if a total of 32 preset stations
have already been stored.
“FULP is displayed if you attempt to store more than 32 preset
stations.
Use the remote control to select the preset number directly.
1 Press BAND while pressing SHIFT to select a
band.
2 Press numbered buttons O-9 and +1Oto select a
preset number.
Example:
To select preset number 20, press +10, +10 and O.
To select preset number 15, press +10 and 5.
Selecting a preset number on the main unit
Press TUNER/BAND to select a band. Press TUNER PRESET
repeatedly until the preset number flashes (preset tuning mode),
and turn MULTI JOG. The preset numbers are selected in
sequence as you turn MULTI JOG.
c >PRESET is also available to select the preset number. Each
time the button is pressed, the next highest number is selected.
To clear a
preset station
Select the preset number of the station to be cleared with the
numbered buttons. Then, press 9 CLEAR, and press 1I SET
within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
i,~ ‘- . ...---..2
(Deck 1)
(Deck2)
Usable tapes
Use Type I (normal) tapes only.
1
2
PressTAPE, then press 9/4 to open the cassette
holder.
I
UI
/A
\
.............=.
$s
! ! I I
Insert a tape with the exposed side down. Push the cassette
holder to close.
Press E to start play.
Only the side facing out fr_omthe unit can be played back.
To stop play, press WA.
To pause play, press 11. To resume play, press again.
To fast forward or rewind, press 44 or - in stop mode.
Then press W= to stop the tape.
When both Deck 1 and Deck 2 are set in the playback
mode
Deck 2 is heard.
ENGLISH 11