Filter
Top Products
If there is a 4-second or longer blank between each track, a search
for the beginning of the current or next track during playback can
be done easily.
Press +4 or - during playback referring to the playback side
indicator (~ or -) on the display.
For example, when PP is pressed while F is displayed, playback
of the next track starts.
Music sensor function may not be able to detect tracks under
the following conditions:
● Blanks of less than 4 seconds between tracks
● Noisy blanks
● Long passages of low-end sound
. Low overall recording levels
1
.>:—–—–—–———–
4
1
After playback on one deck finishes, the tape in the other deck
will start to play without interruption.
1
2
3
4
Insert tapes into deck 1 and deck 2.
Press TAPE/DECK 1/2 to select the deck to be
played back first.
Press REV MODE to select Z).
Press 4P to start playback.
Playback continues until ■ is pressed,
About cassette tapes
● To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
Side A
&
W
(@
\ :(@>
;@@
Y
*
Type 11tape
Tab for side A
detection
slot
%-
/
To record on the tape again, cover the tab openings with
adhesive tape, etc. (On Type II tapes, take care not to cover
the Type II tape detection slot.)
● 120-minute or longer tapes are extremely thin and easily
deformed or darnaged. They are not recommended.
● Take up any slack in the tape with a pencil or similar tool
before use, Slack tape may break or jam in the mechanism.
ENGLISH
17