Filter
Top Products
~ On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
s Use Type I (normal), Type II (high/CrOz) or Type Iv (metal)
tapes for playback.
7 Press TAPE/DECK 1/2 and press A PUSH EJECT
to open the cassette holder.
Insert a tape with the exposed side down, Push the cassette
holder to close.
2
Press ● - to start play.
Selected deck number The tape counter
To select a reverse mode (deck 2 only)
Each time REV MODE is pressed, the reverse mode changes.
To play one side only, select =.
To play from front side to reverse side once only, select 1).
To play both sides repeatedly, select (=>.
“ When tapes are loaded in both decks, => on the display
indicates Continuous Play.
TO SeleCt
a playing deck
When tapes are loaded in both decks, press TAPE/DECK 1/2
first to select a deck,
The selected deck number is displayed.
To stop play, press ■ .
To pause play (deck 2 only), press 11. To resume play, press
again,
To
change the playback side, press+ ➤ in play or pause mode.
To
fast forward or rewind, press - or -, Then press ■ to
stop the tape.
To start play when the power is off (Direct Play Function)
Press TAPE/DECK 1/2, The power is turned on and play of the
inserted tape begins.
To set the tape counter to 0000
Press ■ CLEAR in stop mode.
The counter is alSO set to 0000 when the cassette holder is
opened and closed.
Playback side indicatol
➤ : The front side is being played (forward).
+: The back side is being played (reverse).
16 ENGLISH