Filter
Top Products
28
Timer-recording radio
programs
— REC Timer
To timer-record, you must preset the radio
station (see “Step 3: Presetting radio
stations”) and set the clock (see “Step 2:
Setting the time”) beforehand.
1 Tune in the preset radio station you
want to record (see “Listening to the
radio”).
2 Press TIMER SET on the remote.
3 Press ≠ or ± on the remote to
select TIMER REC, then press
ENTER.
“ON” appears and the hour indication
flashes.
4 Set the time you want to start
recording.
Press ≠ or ± on the remote to set
the hour, and press ENTER.
The minutes indication flashes.
Set the minute in the same way, and
press ENTER.
The hour indication for the turn-off time
flashes.
5 Set the time to stop recording
following the above procedure.
The start time, the stop time, the
recording source, and the preset station
appear in turn before the original display
returns.
6 Insert a blank tape into the deck.
7 Turn off the power.
When recording starts, the volume level
is set to the minimum.
6
3,4
3,4
2
TIMER
SELECT
7
TIMER REC
TIMER REC
1/u
(Power)