Filter
Top Products
27
1 Prepare the music source you want
to play.
• CD: Insert a CD. To start from a
specific track, create a program (see
“Programming CD tracks”).
• Tape: Insert an tape with the side you
want to play facing forward.
• Radio: Tune in the preset station you
want (see “Step 3: Presetting radio
stations”).
2 Press VOLUME +/– (or VOL +/– on
the remote) to adjust the volume.
3 Press TIMER SET on the remote.
4 Press ≠ or ± to display
“DAILY,” and then press ENTER
on the remote.
“ON” appears and the hour indication
flashes.
5 Set the time to start playing.
Press ≠ or ± to set the hour, then
press ENTER on the remote.
The minutes indication flashes.
6 Set the time to stop playing
following the above procedure.
8 Press ENTER on the remote.
The start time, the stop time, and the
music source appear in turn before the
original display returns.
9 Turn off the power.
To check the setting
Press TIMER SELECT on the remote
repeatedly until “DAILY” and “TIMER REC”
disappear, then press TIMER SELECT again.
The preset items appear sequentially.
To cancel the timer operation
Press TIMER SELECT on the remote
repeatedly until “OFF” appears.
Notes
•The system turns on 15 seconds before the preset
time.
•You cannot set the timer if the timer on and off
times are the same.
•When you set the Sleep Timer, the Daily Timer
will not turn on the system until the Sleep Timer
turns it off.
•You cannot activate the Daily Timer and Timer-
recording at the same time.
DAILY
DAILY
n
7 Press ≠ or ± until the music
source you want appears.
The indication changes as follows:
CD n FM/AM n TC n MD