Filter
Top Products
14
Recording a CD
— CD Synchro Recording
This function lets you record from a CD to a
tape easily.You can use TYPE I (normal) or
TYPE II (CrO2) tapes.
1 Press § PUSH of the front cover
and insert a blank tape into the
deck.
REC lamp
5
DOLBY NR
6
7
p
1/u
(Power)
2,3
1
π
7
CD SYNC
lamp
4
With the side you want to
record on facing forward
2 Open the glass door and place a CD
(see page 12).
3 Close the glass door.
4 Press FUNCTION repeatedly until
“CD” appears.
5 Press r REC on the remote.
The deck stands by for recording, and
the CD SYNC and REC lamps on the
unit light up red.
6 Press DIR MODE on the remote
repeatedly to select
to record
on one side or
to record on
both sides.
7 Press ∏ .
Recording starts from the front side.
After about 10 seconds, the CD starts
playing.
To stop recording
Press π.
Tips
•When you insert a new tape, the CD starts playing
after 10 seconds.
•When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR on
the remote before step 7 so “a” appears.
Notes
•You cannot listen to other sources while recording.
•You cannot record from the reverse side.
1/u
(Power)