Filter
Top Products
6
GB
Jack type B
Note
Keep the aerials away from the speaker cords.
3 Connect the mains lead to mains.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
To turn on the system, press ?/1.
Inserting two R6 (size AA)
batteries into the remote
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
1 Press ?/1 to turn on.
2 Press CLOCK/TIMER SET.
3 Press . or > repeatedly to set the
day.
4 Press ENTER/YES or CURSORt.
5 Press . or > repeatedly to set the
hour.
6 Press ENTER/YES or CURSORt.
7 Press . or > repeatedly to set the
minute.
8 Press ENTER/YES.
The clock starts working.
To adjust the clock
1 Press CLOCK/TIMER SET.
2 Press . or > to select “CLOCK SET”,
then press ENTER/YES.
3 Do the same procedures as step 3 to 8
above.
Note
You cannot set the clock in power save mode.
Extend the FM lead aerial horizontally
AM loop aerial
e
E
e
E
Setting the clock