Filter
Top Products
40
GB
You can use TYPE I (normal) tape.
1 Press FUNCTION repeatedly to switch
the function to TAPE.
2 Press DIRECTION on the unit
repeatedly to select “g” to play one
side of a tape, “h” to play both sides,
or “j”
*
to play both sides
repeatedly.
* The tape deck stops automatically after
repeating the sequence five times.
3 Press TAPE nN.
Press TAPE nN again to play the
reverse side.
Other operations
You can record a whole CD or MD on a tape.
You can use TYPE I (normal) tape.
Use buttons on the unit for the operation.
1 Load a recordable tape.
2 Load a CD or MD you want to record.
3 Press SYNCHRO MODE repeatedly
until “CDtTAPE SYNC” or
“MDtTAPE SYNC” appears.
4 Press ENTER/START.
“Press START” flashes. The tape deck
stands by for recording and the CD player
or MD deck pauses for play.
5 Press DIRECTION repeatedly until g
appears to record on one side or h (or
j) to record on both sides.
6 Press TAPE nN repeatedly to select
recording side.
If you select both sides recording or front
side recording, press TAPE nN to light
up the N indicator. If you record on the
reverse side, press TAPE nN again to
light up the n indicator.
7 Press ENTER/START while “Press
START” flashes.
Recording starts.
When the recording is completed, the CD
player or MD deck, and the tape deck stop
automatically.
To stop recording
Press x.
Recording on an MD and a tape at
the same time
Insert a recordable MD, then select “DUAL
SYNC” in step 3. Even if the MD or the tape
ends part-way through the recording, the other
continues recording.
Playing a tape
To Do this
Stop play Press x.
Pause Press X TAPE on the unit. Press
again to resume play.
Fast-forward or
rewind
Press
m or M.
Remove a tape Press Z PUSH OPEN/CLOSE.
Tape – Recording
Recording your favorite
CD/MD tracks on a tape
— CD/MD-TAPE Synchro Recording