Filter
Top Products
25
Playback
Playback
To cancel A-B repeat and resume normal play, press
the REPEAT button.
To change the repeat area, press the A-B button while
playing A-B repeat.
The current point will become the new point A. Set a
new point B to start a new A-B repeat.
z
You cannot specify an A-B repeat play that straddles two
tracks.
z
You cannot use A-B repeat play on unfinalized discs.
Creating Your Own
Program (Program Play)
You can program the play order of the tracks to which
you want to listen on the disc.
Setting Program Details
1 In stop mode, press the PROGRAM button to
enter program play mode.
“PGM” is displayed in the display window.
2 Turn the AMS control to select the track
number. (The selected track will be added
after the last track in the program.)
Upper line display: Number of steps and total
program time.
Lower line display: Track numbers in program
order.
3 Press the AMS control to confirm.
The display returns to next program track
selection.
4 Repeat steps 2 and 3 to set the desired
program.
5 Press the YES button, or wait 20 seconds for
the display to automatically quit setting mode.
Press the CLEAR button in program mode to
delete the last track from the program.
Press the CHECK button in program mode to
check the track order in the program.
Use the number buttons on the remote to select
tracks in program mode. And The selected track
numbers will be added to the end of the
program.
To start program play,
press the H button. Play starts in the order of tracks in
the program.
To select tracks to be played during program play,
turn the AMS control to select tracks in the order of
tracks in the program.
z
You can program a maximum of 25 steps in one program,
or a total program time of 999 minutes.
z
Program details remain stored until the disc is removed,
or the power supply is turned OFF.
PROGRAM