Filter
Top Products
24
Playback
Playback
Playing a Specific Track
Selecting previous or next tracks while playing or
paused (AMS track selection).
To select the start of a preceding or later track while
playing or paused, turn the AMS control. (AMS =
Automatic Music Sensor)
Turn the control to the right (>) to select a higher
track number, and to the left (.) to select a lower
track number. Performing an AMS control operation
during play will start the selected track from its
beginning, and performing an AMS control operation
during pause will move to the start of the selected
track, and then pause play.
Selecting Tracks Directly by Track Number (Direct
Selection)
You can select a track number directly using the
number buttons on the remote, or on a keyboard.
Making a selection during play will start the selected
track from its beginning, and making a selection
during pause will move to the start of the selected
track, and then pause play.
z
Directly Selecting Tracks with a Higher Track Number than
25
Press the >25 button, and then enter the number in the
order of 10s and units using the number buttons (1 to 10).
(Button 10 enters the number 0.)
Example: Selecting track No. 30
Press the buttons in the following order: >25
button, 3 button, 10 button.
Selecting Track Number Using the CD Recorder
Stop play, and then turn the AMS control until the
desired track is displayed. Next, press the H button to
start playing the selected track.
Pansing After Each Track
(Auto-Pause)
This function automatically pauses at the start of the
next track after the previous track has finished playing.
Turn ON and OFF the function by pressing the A-
PAUSE button.
When Auto-Pause is ON, play automatically pauses at
the start of a track, and Auto Pause is displayed.
When Auto-Pause is OFF, play does not pause at the
start of a track, and continues to play the next track
normally.
Playing Tracks Repeatedly
(Repeat Play)
Cycle between the following by pressing the REPEAT
button: Normal play n Repeat all tracks n Repeat 1
track n Normal play. Use the A-B button to operate A-
B repeat.
Repeat All Tracks
Press the REPEAT button. “REP” will be displayed.
When the last track has finished playing, the CD
recorder will automatically return to the beginning and
start to play.
• In CONTINUE play mode, the disc will play in track
order from first to last, and then repeat again from
the start.
• In SHUFFLE play mode, when the last track has
finished playing, shuffle play will start again from
the beginning.
• In PROGRAM play mode, when all the programs
have finished playing, play will start again from the
first step of the program.
Repeat 1 Track
Press the REPEAT button. “REP 1” will be displayed,
and the current track will be played repeatedly. If auto-
pause is turned ON, the CD recorder will automatically
pause at the start of the track each time.
A-B Repeat
Specify a part of the current track you want to listen to.
That part will play repeatedly. A-B Repeat can only be
used in CONTINUE play mode.
1 During play, press the A-B button to specify the start
point of the part you want to repeat (point A).
“REP A-” will light, and “B” will flash.
2 Continue play as normal (or press the M button)
until the track reaches the end point of the part you
want to repeat (point B). Press the A-B button again
to specify point B.
“REP A-B” will light, and A-B repeat will start.
A - BRPEAT