Filter
Top Products
17
Recording
Synchro-recording with a
Sony CD Player
(CD Synchro-recording)
By connecting a Sony CD player to the CD recorder,
you can easily record from CDs just by pressing the CD
SYNC key on the remote. The remote operates both the
CD player and the CD recorder, so install the CD
player and CD recorder close together. (Use as a
wireless remote.) Enabling the CDP remote operation
function may cause incorrect operation, so make sure
the setting is disabled. For details, refer to page 28,
“Setup Menu Operations”.
1 In the Setup menu, set CDP remote operation
function to “Disable”.
2 Insert the source disc in the CD player.
3 Insert a recordable disc into the CD recorder,
and select the input to suit the CD player
connection.
Turn ON the auto track marking from the Setup
menu as necessary to enable automatic track
numbering.
4 On the remote, press the CD-SYNC STANDBY
button.
The CD player changes to play standby, and the
CD recorder changes to recording standby mode.
5 Press the CD-SYNC START button on the
remote.
The CD recorder starts recording, and the
CD player starts to playing.
6 Press the CD-SYNC STOP button on the remote
to stop recording at the desired position.
Note that with analog inputs, the CD recorder
will continue to record even if CD playback has
stopped.
To pause synchro recording, press the CD-SYNC
STANDBY button on the remote.
To restart recording, press the CD-SYNC START
button. The track number will change at the point
where the recording was paused.
You can also use the CD player remote during
CD synchro recording.
Press the STOP button to stop the CD player, and pause
the CD recorder.
Press the PAUSE button to pause the CD player, and
pause the CD recorder.
Press the PLAY button to restart CD synchro recording.
Digital Recording Without
Sampling Rate Converter
If recording digital signals at 44.1 kHz sampling
frequency from a CD or MD source, you can record
without using the sampling rate converter (SRC).
In the Setup menu, set the setup item to “44.1kDirect”.
For details, refer to page 26, “Setup Menu Operations”.
OFF: Use SRC to record.
ON: Do not use SRC to record.
Precautions
If recording sampling frequency signals of 32 kHz and
48 kHz using a DAT or BS tuner source, the setting is
disabled, and sampling rate converter is automatically
used during the recording. If sampling frequency of
input signal changes or switchs to other frequency, do
not use this function (i.e., turn OFF the 44.1kHzDirect
function) to stabilize the recording.
Recording
CD-SYNC STANDBY
CD-SYNC START
CD-SYNC STOP
CD PLAYER P