Filter
Top Products
18
Adding Track Name and
Disc Name (NAME)
CD-R/CD-RW
You can add disc names and track names in to discs in
CD-text format. The disc names and track names that
have been entered are written to the disc when the disc
is finalized. Consequently, enter the names just before
finalizing the disc.
Note: Removing discs or turning OFF the power
supply before the disc is finalized but a name has been
entered will result in the name data being lost.
You can record up to 23 characters each for disc name
and track name.
You can use the following characters.
Alphabet: A to Z, and a to z.
Numbers: 0 to 9
Symbols: ! “ # $ % & ‘ ( ) * + , - . / : ; < = > ? @ [ ] ^ _
` { | }
_
(blank)
After entering the name, if you try to remove the
disc without finalizing, the following warning
message will be displayed: “Text Edited sure Z?” If
you do not want to save the name, press the Z
button again within 4 seconds.
Operations on the Disc’s TOC AreaOC Area
Operations on the Disc’s TOC Area
Finalizing (FINALIZE)
CD-R/CD-RW
CD-R discs can be played on ordinary CD players
when they have been finalized, but you cannot change
the disc status, such as adding additional tracks.
CD-RW discs can be played on CD-RW-compatible CD
players when they have been finalized. You can later
add or delete tracks on CD-RW discs by unfinalizing
(i.e., undoing the finalizing) them.
Once finalizing has started, it cannot be stopped.
Finalizing takes approximately 130 seconds from
start to finish. During this time, do not turn OFF the
power supply to the CD recorder, as this will
damage the TOC of disc, you will not be able to use
the disc again.
Operating Procedure
1 Press the FINALIZE button.
2 The CD recorder will enter check mode.
“Start?” and “ENTER/YES” will be displayed
alternately.
3 If you are ready to finalize, press the AMS
control or the YES button.
If you are not ready, press the MENU/NO
button. When finalizing starts, “Finalize” will
flash in the display. The countdown time
remaining until finalizing finishes will be
displayed.
4 When finalizing is completed, the FINALIZE
indicator will light.
Finalized discs cannot be finalized again. You cannot
finalize discs on which nothing has been recorded.